Petzl PAW - Rigging Plate
The PAW rigging plate allows the organizing of the workstation and setup of multi-anchor systems. The hole design allows ropes or slings to be threaded for direct connection. Made of forged aluminum, it offers an excellent strength-to-weight ratio.
Available in three sizes: S, M, L
Paw S: For organizing the belay and creating a system with multiple anchors. Useful in aid climbing and for setting up Tyrolean traverses.
Features:
- For easy organization of the workstation and setup of multi-anchor systems:
- 19 mm holes allow the locking sleeves of most carabiners to pass through, enabling the carabiner to be rotated
- hole design allows ropes or slings to be threaded for direct connection.
- main attachment hole accepts up to three carabiners
- the odd number of attachment holes enables the system to be centered and balanced
- up to three users can be connected at the same time
- Durability:
- made of forged aluminum for an excellent strength-to-weight ratio
- durable markings, thanks to the recessed area in the center of the plate
- Available in three sizes: S, M, L
- Two wide auxiliary attachment holes (size L only), compatible with the CONNEXION FIXE and CONNEXION VARIO anchor straps.
Technical Features:
- Material(s): aluminum
- Certification(s): CE, NFPA 1983 General Use (2017 Ed):
- Paw S - MBS 36kN
- Paw M - MBS 45kN
- Paw L - MBS 50kN
| Product Code |
G063AA00 |
G063AA01 |
G063BA00 |
G063BA01 |
G063CA00 |
G063CA01 |
| Size |
S |
S |
M |
M |
L |
L |
| Color(s) |
Yellow |
Black |
Yellow |
Black |
Yellow |
Black |
| Weight |
60 g / 2.11 oz |
60 g / 2.11 oz |
180 g / 6.35 oz |
180 g / 6.3d oz |
350 g / 12.34 oz |
350 g / 12.34 oz |
| Breaking strength |
36 kN |
36 kN |
45 kN |
45 kN |
50 kN |
50 kN |
Technical Notice:
This product meets the requirements of Regulation (EU) 2016/425 on personal protective equipment
Field of Application
- Personal protective equipment (PPE) used for fall protection.
- Rigging plate.
- The PAW rigging plate can be used to connect one to three users simultaneously. In accordance with RFU 11.114, it is not considered to be an anchor as defined in the EN 795 and TS 16415 standards.
- This product must not be pushed beyond its limits, nor be used for any purpose other than that for which it is designed.
Before each use
- On the product, verify the absence of any cracks, deformation, marks, wear, corrosion...
- Verify that the attachment holes have no burrs or sharp edges that could damage any connected equipment.
During use
- It is important to regularly monitor the condition of the product and its connections to the other equipment in the system.
- Make sure that all items of equipment are correctly positioned with respect to each other.
