Scubapro Elbow 90 120 Degree for Second Stages  £38.00

Scubapro Elbow Swivel - 120 & 90 Degree

The Scubapro 120 Degree Elbow provides a fixed 120 degree angle bend for low pressure hose to the second stage, ideal for alternative hose routing that would affect the natural positioning of the second stage.

The Scubapro 90 Degree Elbow is a small joint to fit to your second stage so you can route the hose out at a 90° angle. Useful for long hose donate setups you can route the hose back more naturally wherever you want it to go with less strain on the hose.

Designed to fit between your first stage and low pressure 2nd stage. You can use the Scubapro Elbow to redirect the direction of the hose by a 120 / 90 degrees, for example with sidemount diving or stage tanks.

Divers sometimes use regulator and/or tank valve configurations which can affect the natural positioning of the LP hose. This is solved with the Scubapro Elbow which gives the best orientation to the second stage. With a predetermined 120° angle, it is ideal for alternative routing of low pressure hoses, be primary second stage or octopus. Its wide internal diameter does not affect the second stages performance.

The most simple and effective way a second stage can be used in any position.

• Why 120 Degree? Because its the maximum bend you can have without reducing airflow.
• 90 Degree is available where that configuration outweighs the 120 Degree benefits.
• Shorter over shoulder hoses can be used and standard hoses can be used underarm reducing drag.
• Its wide internal diameter does not affect the second stages performance.